„… provides the forces and slip velocities in the different contact points. Reasonable approaches for the …” „… reduced, as dropping forces coincident with lower slip velocities for a shorter time. Thus, the friction …” „… charge motion at low lifts by differential peak lift, and enable cylinder deactivation. Twisted and …”

„… limited as the load transfer path causes deformations in the valve guide boss as well as unacceptable …” „… contact is established and the resulting contact pressure (and the resulting wear) is then only limited by …” „… differential angles. Ideally the contact starts at the outer diameter and works its way concentrically towards …”

„… frictional losses in sliding bearings raise proportionally to the square of the differential velocity …” „… between the contacting surfaces. In an usual axial sliding bearing the differential velocity equals the …” „… circumferential velocity of the running surface. In a thrust cone bearing a lower differential velocity occurs …”

„… . Furthermore, in [6] the effect of MRF applied as a limited slip differential for the application in …” „… Magnetorheological Limited Slip Differential for Automotive Applications“, SAE International, 2018. [7] Willis R …” „… shearing surfaces (rotors). Thereby, the viscous losses of the MRF exposed to high differential rotational …”

„… ) [5], [6] and smoothed particle hydrodynamics (SPH) [7]. However, limited attention has been given to …” „… traction control system was implemented to prevent excessive wheel slip. The motor torque would be reduced …” „… should the slip ratio of the rear wheels exceed a threshold value of 0.3 with the reduction being …”

„… modeling combined with a neural network for fuel rate prediction [4]. Both algorithms were limited to a …” „… neglected. The traction model assumes all-wheel drive, locked differentials, and that the overall traction …” „… effect and the effect of shifting weight forces on the axles. Furthermore, it assumes the same slip 𝑠 …”